MS+PTFE,DU BEARING Steel-Backed - INCH SIZE

Sleeve Bearings

• Standard stock products

• Self-lubricating dry sliding bearing

• A steel-backed composite material comprised of:

  • Low carbon steel backing for extremely high load capacity-.50 – 2.7mm thick

  • Sintered bronze offers optimal heat dispersion –.20 - .35 mm thickness and

  • PTFE – lead sliding surface creates a low friction coefficient and allows for a wide temperature range – thickness .2 mm

• Can be used where many liquid lubricants fail; also performs well with lubrication

PTFE lined self-lubricating bearing also called DU bushing, dry bushing, DU bearing, bushing,PTFE coated bearing,SF-1 oilless bearing,PTFE liner metal polymer composite bearing and PTFE based plain bearing. This type of DU bush takes PTFE layer as sliding layer which makes products can perform very well under dry condition or oil condition.

Material Structure

These materiais consist of metal backing bonded to a porous bronze sintered layer with PTFE based polymer bearing layer.The metal backing provides mechanical strength, while the bronze sinter layer provides a strong mechanical bonding between the backing and the bearing lining,the PTFE based polymer offers exceptional low friction even under dry condition.

Advantages

Improved energy efficiency with the low friction performance of PTFE-enriched overlay;
Extended service life with a high wear-resistant bronze layer;
Zero maintenance as self-lubricating bearings can operate dry without grease;
Greater reliability than bimetallic bearings by avoiding potential shaft/bearing seizure under boundary lubricated conditions and frequent stop/start operation;
Compact, lightweight designs with thin-wall bearing construction;
Reduced noise with no metal-to-metal contact between the bearing and the shaft;
Quick, simple assembly without expensive mounting tools.

Application

Textile Industry
Cement Industry
Pharma Biotech Food Industry
Petrochemical Industry
Agriculture Industry
Bakery & Ovens